XROOF Brand ASA Spanish Roof Sheet has high-cost performance, aesthetics and excellent practical performance, ASA Spanish Roof Sheet has been widely used in various buildings and cities around the world.

In actual applications, some customers reported that the ASA Spanish Roof Sheet would be deformed. Why is the Spanish roof tile deformed? How should we avoid this problem?

First, let’s look at the quality of the ASA Spanish Roof Sheet. The Spanish roof tiles made from inferior raw materials (such as recycled materials) are easy to deform and bend; secondly, in the production of ASA Spanish 1050 Roof Sheet, poor technical control results in high moisture content of ASA spanish 1050 roof sheet and shrinkage and deformation. Such ASA spanish 1050 roof sheet will form uneven crown after being installed on the roof.
 
But if you buy a quality-assured ASA Spanish Roof Sheet, and it is still deformed, there is another reason-installation problems. ASA spanish roof sheets are installed with a standard purlin spacing of 660mm. If the spacing is too large, it will cause the Spanish 1050 roof sheet to arch or sink. The elastic line on the surrounding walls shall be leveled according to the design elevation, and the horizontal line shall prevail when nailing. The arching height of the horizontal line shall be 1/200 of the short span of the room, and the longitudinal arch shall be hoisted evenly. The keel should be straight, and should not be twisted and there should be no knots in the transverse cross-section; Spanish 1050 roof sheet stress joints are not tightly connected, and displacement and deformation will occur after stress.

The above analysis is the reason for the deformation of the ASA Spanish roof sheet. Special remind you to pay attention to these factors when buying and installing Spanish 1050 roof sheet to avoid deformation and other problems.For more detail about the ASA Spanish roof sheet, welcome to contact us.

RECOMMENDED FOR YOU